Midwest Contractor

Dedicated to the people who make our built environment better and safer. We tell your stories and celebrate your successes.

Register with us and receive industry news and content only available to subscribers.

Subscribe
Contacts

Indianapolis, IN, USA (HQ)

903 E. Ohio St., Indianapolis, IN 46202

Call: (317) 423-2325

info@acppubs.com
November 2026

Finding the Right Water Pressure for Hydro Excavation

When used properly, hydro excavation can give crews a nondestructive way to uncover underground infrastructure, using pressurized water to break up soil and a powerful vacuum to remove the resulting slurry. But when it comes to water pressure, more isn’t always better.

The right pressure depends on the ground, the job site, the nozzle, and what may be buried below. Understanding those variables can help operators work efficiently while reducing the risk of damaging underground utilities.

TRUVAC experts offered five factors to consider when managing water pressure on a hydro excavation job.

1. Start With the Ground

Before setting the water pressure, consider what you’re asking the water to do.

Loose or sandy soil may require less pressure to break apart than dense, compacted material. Moisture content, rocks, and other obstructions can also affect how readily the ground can be excavated. Frozen ground presents another challenge and may require heated water to help penetrate and loosen the soil.

Leica Geosystems Inc
Your local Leica Geosystems Inc dealer
Laser Specialist inc

That makes site assessment an important first step in determining appropriate water pressure. Crews should also consider what underground utilities are being uncovered to make sure they do not damage those with too much pressure.

The objective isn’t to use as much pressure as possible. It’s to use the appropriate pressure for the conditions and the work being performed.

2. Match the Pressure to the Setting

An industrial excavation and a utility located in a residential area can present very different conditions.

On an industrial site, crews may be working through heavily compacted ground or tackling larger-volume excavation. In a residential setting, operators may be daylighting gas, electric, fiber, or water lines in a confined area where precision is paramount.

Gehl Co - Loaders/SS
Your local Gehl Co dealer
Star Equipment LTD

Even within the same project, conditions can change as the excavation progresses. Operators should continually account for the material being excavated, the proximity of underground facilities, and applicable job site requirements rather than relying on one pressure setting for every situation.

Before excavation begins, crews should also call 811; review available utility information; and follow applicable regulations, utility-owner requirements, and site procedures.

3. Know Your Nozzle

Pressure alone doesn’t tell the whole story. The way that pressure is delivered matters.

Straight-tip nozzles concentrate the water stream in one location, while rotating or spinning nozzles distribute that energy over a wider area. Research presented by GTI Energy (formerly the Gas Technology Institute) demonstrates how significant that distinction can be.

Iowa Mold Tooling Co Inc
Your local Iowa Mold Tooling Co Inc dealer
Star Equipment LTD

In GTI Energy’s testing, a straight water jet operating at 1,500 psi punctured medium-density polyethylene (MDPE) pipe after 3 seconds when held 8 inches above the pipe. At greater distances, puncture still occurred when the jet remained in place longer.

Spinning nozzles produced markedly different results. Tests of spinning nozzles operating at 2,500 psi found no failure of MDPE pipe after 5 minutes, including tests conducted just 1 inch above the pipe.

The takeaway isn’t that one pressure number is right for every application. It’s that nozzle type, pressure, distance, and technique work together. Operators should understand the characteristics of the nozzle they’re using and follow applicable standards and requirements.

4. Keep It Moving

Technique matters just as much as equipment settings.

LBX Link Belt Excavators
Your local Link Belt dealer
Kirby-Smith Machinery

Best practices from GTI Energy state that pressurized water or air wands should never remain motionless during excavation. They recommend maintaining 8 inches between the nozzle and the underground facility or subsoil.

GTI Energy’s straight-jet testing helps illustrate why. Concentrating pressurized water on one point for even a few seconds can significantly increase the potential for damage.

As part of safe digging practices, operators should also avoid aiming directly at underground facilities and never insert the nozzle into the subsoil while excavating within the tolerance zone.

Good hydro excavation technique is about more than dialing in a psi number. It means controlling pressure, distance, nozzle movement, and direction throughout the excavation.

Komatsu Dealer Program
Your local Komatsu America Corp dealer
Road Machinery and Supplies Company

5. Take Guesswork Out of Pressure Control

Conditions can change quickly on a job site. Technology can help operators respond without losing control of one of the most important variables.

For instance, TRUVAC's DigRight technology allows operators to select a maximum water-pressure limit based on site or industry requirements. Coupled with a multiflow water pump, the system automatically adjusts water flow to match the operator's nozzle selection.

In addition, programmable presets in technology solutions can help operators transition quickly between pressure ranges, which can be particularly useful when the work or conditions change.

Pressure With a Purpose

Hydro excavation is designed to provide crews with greater precision around underground infrastructure. Getting the most from it means treating water pressure as a tool rather than just a number on a gauge.

SITECH
Your local Trimble Construction Division dealer
SITECH Mid-America
SITECH Central LLC
SITECH Midway

Read the ground. Understand the setting. Choose the appropriate nozzle. Keep the wand moving. And use pressure-control technology when available to help operators stay within the requirements of the job.

When tough ground meets sensitive infrastructure, the goal isn't maximum pressure. It's the right pressure for the job.

Manitou
Your local Manitou dealer
Star Equipment LTD
Iowa Mold Tooling Co Inc
Your local Iowa Mold Tooling Co Inc dealer
Star Equipment LTD
LBX Link Belt Excavators
Your local Link Belt dealer
Kirby-Smith Machinery