Though relatively cheap compared to the rest of the equipment in a quarry or mine, it could be argued that media has as much impact on productivity and material quality as the vibrating screen. And it is important that operations give screen media as much buying consideration as they do the vibrating screen itself.
For this reason, a number of factors should influence the choice of screen media. Certainly, cost is a consideration, but it shouldn’t be reduced to purchasing price versus wear life. A full cost analysis needs to include labor cost for change-outs and cleaning, loss of production during downtime, media performance — tons produced, for example — and indirect factors like crusher relief. Thinking only in terms of dollar value can be shortsighted and end up costing an operation more in the long run. The operating environment — including material characteristics and recurring screening problems — should also be considered. From there, look at different media types to find out what fits best, and learn proper installation and maintenance to ensure long term success.
Take a look at the flow of material. A visual check or belt cut of the crusher feed belt is an effective way to see if there is saleable rock being sent to the crusher. This could be the result of carryover or because the deck capacity is exceeded. The solution may be adjusting the cut, improving capacity, or fixing screening problems like blinding or pegging with alternative screen media.
Now, examine the longevity of the existing screen media. Is it wearing much faster than expected? Note the area of the deck with the most wear as that could indicate a need for a stronger media. Spot wear by looking at wire diameter and whether wires are developing a flat top, especially in high wear zones like the feed end and center area of the deck. Look for rounded openings if using synthetic media such as rubber or polyurethane.
Your local Atlas Copco CMT USA dealer |
---|
Power Equipment Co |
In addition to the deck itself, the pile of discarded screen media can be a good area to look for insight into screening problems. Make note of things like broken wires, wear areas, pegging, or blinding to pinpoint problems on your decks. Any of these can lead to material contamination and downtime, making them a significant cause for concern. Also, black marks on the underside of polyurethane or shiny undersides of wire can indicate a poor fit of your screen media and may point to a need for additional personnel training.
Perforated steel plate and heavy rubber panels are, almost by definition, the most durable options. Rubber can be effective for screening material with a top size larger than 12 inches or for openings bigger than four inches, but tends to be more susceptible to pegging. Perforated plate is an acceptable option for applications requiring a durable screen media with a lot of open area, but is often noisier and heavier, which can cause issues. Both also typically have less open area than wire alternatives.
Woven wire cloth has been the traditional option for a long time for a reason. It is relatively inexpensive and effective. But there are a number of advanced options available that offer more durability, throughput, and versatility. And purchasing a traditional woven wire design based solely on price may end up costing more in terms of wear life and more frequent change-outs.
Synthetic modular media, such as polyurethane or rubber, is typically known for its long wear life and ability to reduce noise levels, but it isn’t without its own challenges. This type of media typically has less open area than wire screens, leading to decreased throughput. This, in turn, also reduces the capacity of bottom decks because the material takes longer to make its way down. Also, operations using synthetics must keep a close eye on the panel openings. Openings tend to wear by rounding out, making it necessary to regularly check that the panels are still the correct size and not letting out of spec material through.
Both synthetic screen media and traditional woven wire are very rigid and rely on the vibrating screen to do most of the heavy lifting. The static movement of the screens limits vibration to 800 or 900 cycles per minute. In most cases, this does not hinder the screen media from achieving adequate production and throughput, but it is not fully using screening equipment, either. And often it results in common issues, such as blinding and pegging.
Your local Iowa Mold Tooling Co Inc dealer |
---|
Nichols Fleet Equipment |
High vibration screen media offers a wear life compromise between synthetic and woven wire, and often provides the most performance benefits. The media features high strength wire bonded by polyurethane or rubber strips to hold individual wires. The wires vibrate independently of one another — within opening size specifications — to amplify the screening process and increase throughput by as much as 40 percent. Additionally, the vibrations prevent or significantly reduce pegging, blinding, and clogging issues, improving product quality and reducing potential downtime.
However, not all high vibration screen media is the same. Most manufacturers don’t customize the media specifically to each application to ensure optimum performance and wear resistance. When properly fitted to an application, high vibration screen media can amplify the work of the vibrating screen with vibrations of 6,000 to 10,000 cycles per minute — up to 13 times greater than traditional, rigid media options. Often the screen media can be modified with thicker or double wires and additional polyurethane to further boost durability.
There are inexpensive options for every style of screen media, but operations should hesitate before choosing them. The lower price often comes with reduced performance and wear life as a result of poor quality with the material, weaving, trimming, and hooking process for wire screens or, similarly, poor manufacturing and material with other styles of screen media. The up-front cost will be lower, but lost production and frequent screen replacements will quickly add up.
Inspect the condition of all components that come in contact with the screen, and replace if necessary. Ensure the panel is the correct size and orientation before installation and clean off build-up material for a solid fit. Also, make sure all support bars touch the screen and tension matches manufacturer recommendations. Too-loose of a tension will not yield optimal throughput and can lead to early breakage and a potential increase in blinding problems.
Preventative maintenance is also key. Check screen media at least weekly to make sure tensioning is still proper and that there aren’t any unusual signs of wear. Also look at surrounding components for any potential issues, such as corrosion or cracks. Vibration analysis systems can be a useful way to not only monitor and fine tune the vibrating screen’s health, but also to spot inconsistencies that could lead to problems. This could include imbalance or excessive vibration, which can lead to screen failure or accelerated component wear. Some of today’s systems don’t even require the operation to shut down the machine for the testing.
Your local Wirtgen America dealer |
---|
Dobbs Equipment (DXC) |
Power Equipment Co |
Screen media maintenance and installation seminars with information provided by a trusted OEM can be another excellent way to learn how to effectively maintain screen performance. Manufacturers often offer this service through site visits or via a nearby dealer.
Selecting the best screen media involves taking a look at the big picture. While not required, an operation can expedite the decision process with experience-backed recommendations from a screen media OEM or dealer. With infrastructure on the rise, the potential for fewer screening problems, increased uptime, and more profit flowing over the screen makes the whole process worthwhile.