Constructioneer

Dedicated to the people who make our built environment better and safer. We tell your stories and celebrate your successes.

Register with us and receive industry news and content only available to subscribers.

Subscribe
Contacts

Indianapolis, IN, USA (HQ)

903 E. Ohio St., Indianapolis, IN 46202

Call: (317) 423-2325

info@acppubs.com

Idle Mitigation Technology: Reduce Operating Costs and Improve Sustainable Practices

ZeroRPM idle mitigation system installed in a truck
ZeroRPM idle mitigation system installed in a truck
Mitul Chandrani, Vice President of Marketing, Mission Critical Electronics
Mitul Chandrani, Vice President of Marketing, Mission Critical Electronics
ZeroRPM system
ZeroRPM system
Whether you’re at a jobsite in the middle of the day in Arizona’s scorching heat or in the Midwest during a sub-freezing, blistery winter day, a place to escape extreme weather conditions is a must-have for those working outside. For many contractors, their work truck serves as their mobile office, and it’s often their place of refuge to cool off or warm up throughout the day. Not only that, but a truck is often used to supply power for tools and charge electronics such as laptops, metering devices, radios, and other devices for the jobsite.

Keeping a truck climate-controlled and ready to assist with devices and tools requires power – and a lot of it. To generate that power, idling the truck engine has long been standard practice. But there are downsides to doing that. The amount of time your vehicle idles over the course of a day adds up and can significantly impact your fuel and vehicle maintenance costs, not to mention the noise pollution and reduced air quality at your jobsite. In fact, in many vocational or work truck applications, vehicles spend several hours per day idling.

For many commercial vehicles, roughly one gallon of fuel is burned per hour when in idle, according to the U.S. Department of Energy. And while the wheels of a vehicle aren’t in motion while idling, the wear and tear on the engine is still prevalent. When you consider the current high price for diesel and rising costs for servicing vehicles, you can see how over time, these operating costs accumulate and take away from your bottom line.

Alternatives to Idling
For most, idling is simply the most convenient way to generate consistent power and, therefore, the associated costs are a part of doing business. But there are alternative solutions that can essentially replace the need for extended idling and significantly reduce costs.

According to Mitul Chandrani, Vice President of Marketing for Mission Critical Electronics (MCE), the idle mitigation solutions system MCE’s subsidiary, ZeroRPM, developed is helping truck owners more effectively utilize power generated from their vehicles.

“The idle mitigation solution ZeroRPM has developed converts diesel- and gas-powered trucks into hybrids when they’re in park by diverting power that is typically drawn from the constant energy produced from a running engine to stored power from a vehicle’s lithium-ion battery,” he said. “During periods of extended stationary use, the idle mitigation system will automatically engage the vehicle’s engine to recharge the batteries as needed. As a result, vehicle operators can draw power from their battery for several hours before there is a need to replenish the battery by running the engine.”

Gomaco
Your local Gomaco dealer
Gomaco -Contact Local

Chandrani added that one of the other ways to extend runtime on batteries is adding solar wherever possible. Solar panels themselves do not power anything, but they provide charging to a lithium house bank when the sun is out. This helps replenish consumed energy and delays engine starting, further saving fuel and costs.

“If space permits, adding solar is a no-brainer and vehicle operators should maximize available space for solar, especially if the vehicles are operating in geographies with enough sun hours,” Chandrani said.

Li-Ion batteries developed by Xantrex (another MCE company) are used with this mitigation system instead of traditional lead-acid batteries because they can be completely discharged without damaging the battery. For example, if you have a 600-amp hour Li-Ion battery, you have 600-amp hours of usable power. Lead-acid batteries, on the other hand, can only be discharged 50 percent at most without causing damage to the battery. Standard AGM or lead-acid batteries found in most vehicles typically last 400 to 500 duty cycles, according to Chandrani, whereas a quality Li-Ion battery may last 4,000 to 5,000 cycles depending on use.

Cost Savings
“While Li-Ion batteries are more expensive than other battery types, they last longer and can be relied on to generate the power truck operators need for long periods of time without draining or damaging the battery,” Chandrani said. “While there is an upfront cost for a Li-Ion battery and the idle mitigation system to more efficiently supply power over idling, the time it takes to offset the cost of this system versus operating costs associated with idling is relatively short. For work trucks that average four hours or more of idle time per day, that can be accomplished in as little as one year.”

According to Chandrani, a Class 8 work truck that operates in Maryland and uses ZeroRPM’s idle mitigation system eliminated more than 2,200 hours' worth of idle time over a one-and-a-half-year period. As a result, the truck saved approximately 2,415 gallons of fuel for an estimated $10,250 in fuel savings.

These idle mitigation statistics and estimated cost savings are visible to all customers using ZeroRPM’s mitigation solution through the ZeroRPM intelligent metrics system.

“Whether it’s one truck or hundreds, vehicle owners can access data collected from each vehicle using the idle mitigation technology,” Chandrani said. “They also can monitor battery levels so they know how charged a battery is and when the mitigation system will autostart the engine. It’s a useful tool that helps fleets or truck owners monitor the effectiveness of the system and how much they’re saving.”

Sustainability Advantage
While the opportunity to reduce operating costs is a primary reason to specify trucks with idle mitigation systems, according to Chandrani, increasing regulation at the state and federal level regarding emissions is also something companies are taking into account.

“New regulations are having an impact on companies and how they plan for the future,” he said. “In the past several years, we’ve seen many companies be ahead of the curve on this, taking it upon themselves to proactively find solutions to operate more sustainably. For companies that bid on government-funded projects, a track record of prioritizing ESG principles can be the difference between winning the bid or not as many state and federal agencies are increasingly wanting to do business with these companies. Integrating eco-friendly technology can be an easy way to help promote your company in a positive way.”

For operations that rely on their vehicle to power in-cab electronic systems and external devices and have traditionally relied on idling to supply the necessary power, mitigation technology can be an effective alternative to cut costs associated with running vehicles and to operate more eco-friendly.

Gomaco
Your local Gomaco dealer
Gomaco -Contact Local
Gomaco
Your local Gomaco dealer
Gomaco -Contact Local
Gomaco
Your local Gomaco dealer
Gomaco -Contact Local